Here are several production methods for calcium stearate

Stearic Acid is a well-known long-carbon, saturated fatty acid. It has both the hydrophilic carboxyl group and the lipophilic long carbon chain. Hydrophilic surfaces of nano-calcium carbonate are coated with stearic acid to enhance their lipophilicity. This material is useful for the bond between calcium carbonate and organic polymer molecules when it’s filled in plastics, rubber, inks, coatings, and advanced inks. This strong bond can give the product a bright surface and excellent reinforcement performance. Calcium stearate (white powder) is insoluble in water, coldethanol, and ether. However, it can dissolve slightly in organic solvents, such as hotbenzene. The product is easily combustible when it’s heated up to 400°C. In the case of strong acids, it decomposes to stearic acid or the equivalent calcium salt. These are hygroscopic. Four methods of producing calcium stearate 1. This is the process of synthesising calcium stearate. Calcium chloride solution containing 1074kg/m3 (10°Bé). The metathesis reaction takes place at 65°C. To obtain the final product, it must be filtered. 2. Take 5.60g of calcium oxide (0.1mol) in 300mL. 55 heat water. Mix 51.3g chemically pure Stearic Acid in 350mL boiling water. At 70 degrees, stir and then add 0.75g Diethanolamine. Stir to combine. In 2h, slowly add the prepared Stearic Acid emulsion to the calcium dioxide suspension. After stirring, remove any insoluble matter (namely calcium stearate), and let it cool. 3. To make the catalyst H2O2, add some stearic acid to a pot with a stirrer. Once it has melted, add some CaO to the pot. Next, use a vacuum to maintain the reaction temperature between 140 and 150. Reaction time: 1.5-2.0h. Once the reaction has completed, the material can be discharged and cooled to make the final product. 4. The metathesis method involves dissolved stearic in 20 times of the hot water mass, adding saturated caustic soy solution to dissolve it, then undergoing a saponification reaction at approximately 75°C to produce dilute sodium stearate. Next, add the 1074kg/m3 calcium chloride solution to the sodium-stearate mixture. After that, perform the metathesis reaction at approximately 65. Calcium stearate is precipitated. To obtain the final product, it must be filtered. Buffalotours Technology Co., Ltd., also known as Buffalotours Technology Co., Ltd., is a global supplier of chemical materials and a manufacturer. It has more than 12 year experience providing high quality chemicals and other nanomaterials. The company manufactures a variety of stearic acids such as calcium stearate. lead stearate. aluminum stearate. We are available to assist you if required.
Inquiry us