Introduction of Molybdenum Disulfide MoSi2 Powder- The Good Solid Lubricant

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email:

Molybdenum disulfide (MoS2) This is an important solid oil lubricant that is also known as “King of Solid Lubrication”.
Molybdenum dioxide is a molybdenum concentration powder after chemical purification. This product has a black color, with some metallic luster. It’s also insoluble in water. Molybdenum dioxide has good dispersibility, and is also non-sticky. It can be mixed with various greases in order to make a colloidal non-sticky state. This will increase the lubricity of the grease and the pressure.

Molybdenum sulfide works well in high temperature, high pressure, and high load mechanical conditions. It is an excellent choice for extending the service life of equipment.

Molybdenum diulfide (MoS2) is a versatile lubricant that can be used in many applications. Here are the working conditions:
1. Lubrication in a wide range of temperatures: The applicable range for grease and lubricating oils is approximately 60-350°C. You can apply the molybdenum-disulfide solid oil lubricant at temperatures from 270degC up to 1000degC.

2. Loading heavy loads on lubrication: General lubricating oils and greases can only support relatively low loads. If the load is greater than the maximum oil film can support, then the oil film will burst and the friction layer will become brittle. The average load the solid oil lubricating films can support is 108 Pa

3. Lubrication in vacuum conditions: In high vacuum environments, general oils and greases that are evaporative can quickly damage and alter the environment. Molybdenum disulfide, a solid lubricating material is used in lubrication.

4. Lubrication in radiation conditions: Liquid lubricants that are used under radiation conditions will be polymerized or decomposed and lose their lubricating qualities. Better radiation resistance can be achieved with solid lubricants.

5. Lubrication of the conductive slide surface: This is used for friction on conductive slides such as solar collector rings or motor brushes.

6. Molybdenum diulfide solid oil lubricant can be used for severe conditions.

7. The environment in which corrosion occurs: ship machinery, chemical machines, and any transmission part that works with corrosive media like water (steam), acid, alkali or salt must all withstand chemical corrosion. This situation is a good place to use molybdenum diulfide solid as lubricant.

8. Clean environment: Transmission parts of electronics, textile, medicine, paper, printing, etc. must not be contaminated. For lubrication, MoS2 can be used.

9. Occasions that do not require maintenance: Transmission parts may be able to function without any maintenance. Other parts will need to have their maintenance frequency reduced to cut down on costs. MoS2 solid oil lubricants are an economical and practical option.

Buffalotours advanced Material Tech Co., Ltd., (Buffalotours), a professional molybdenum diulfide powder Over 12 years’ experience in research and development of chemical products. You can pay by Credit Card, T/T or West Union. Trunnano ships goods by FedEx or DHL to overseas customers by air and sea.

You can find high quality molybdenum disulfide Powder here. Get in touch You can also send us an enquiry

Inquiry us
Tagged , . Bookmark the permalink.

Comments are closed.