High Purity Molybdenum Disulfide MoS2 Powder CAS 1317-33-5, 99% |

Molybdenum Disulfide MoS2:
Molybdenum diulfide (Moly) is a. Molybdenite is a component. Molybdenum disulfide is a powder. It is a black solid powder with metallic luster. The chemical formula for molybdenum sulfide It is called MoS2. Molybdenum disulfide melting point The temperature is 1185degC. Molybdenum disulfide density Mohs hardness is 1.01.5. Mohs Hardness: 1.01.5. At 1370degC the decomposition process begins. It decomposes at 1600degC into molybdenum metallic and sulfur. At 315degC it starts to oxidize in the air. As the temperature rises, the oxidation reactions accelerate. Moly Disulfide Insoluble in concentrated sulfuric and dilute acids, water or dilute acid. It is not soluble in alkalis or organic solvents. However, it is soluble with aqua regia, boiling concentrated sulfuric acids and other acids. At 400, it is slowly oxidized to produce molybdenum Trioxide.
Test the molybdenum trichoxide generated with 2MoS2+7O2- 2 MoO3+4SO2. After treating the product with sodium or potassium hydroxide solutions (the goal is to convert molybdenum trioxide into molybdate), the titanium iron reagent is then added in dropwise. This method is sensitive enough to detect trace amounts. The solution will not turn golden yellow if no molybdenum dioxide is generated. This is because molybdenum sulfide reacts with either sodium or potassium hydroxide.
Molysulfide Can react with chloride when heated to form molybdenum penteachloride
2 MoS2+ 7 Cl2- 2 MoCl5+ 2 S2Cl2
LixMoS2 (intercalation compound or interlayer compound) is the result of a controlled reaction between molybdenum disulfide, alkyl lithium and a controllable amount of oxygen. LiMoS2 will be formed if the reaction is with butyllithium.
Molybdenum Disulfide is a disulfide with a high sulfur content. This active sulfur can easily cause copper to corrode. In many books and articles on lubricant add-ons, it is mentioned. When parts made of copper or its alloys are to be lubricated it is not difficult to use molybdenum diulfide lubricating product, but also add copper corrosion inhibiters.

Send an inquiry for the latest news Molybdenum disulfide price You can also contact us if you have any questions. Molybdenum disulfide MoS2 – Powder Bulk discounts are available.

Features of Molybdenum Disulfide MoS2:
1. Molybdenum Disulphide Nanoparticles CAS 1317-33-5 (Nano MoS2) are shiny dark gray particles with very good thermal and chemical stability.
2. It is soluble in aqua regia, concentrated sulfuric acid and water. However, it is insoluble in dilute acids and water.
3. The lubricant adhesion can form an extremely efficient dry lubricating coating; it is less wear and friction-reducing technology.

Analysis of Molybdenum Disulfide MoS2:

MoS2	MoO3	Insolubles	Fe	SiO2	H2O	Oil	Acid Value
99%	0.05%	0.26%	0.14%	0.05%	0.08%	0.10%	0.54

What is Molybdenum Disulfide MoS2 Poudre produced?
Natural law
MoS2 may be produced by natural methods, such as the molybdenite concentration purification method. The molybdenite concentrator is subjected to physical and chemical reactions to remove acid-insoluble materials, including SiO2, Fe, and Cu. Ca, Pb and impurities such as copper are refined further to get nano-MoS2. Although the purity of nano-MoS2 made by the natural process is low, purification technology still needs to be improved. If the temperature of the atmosphere is less than 400 degrees, the most expensive MoS2 should be used. It has a lubricating capability below 1300. Therefore, it is recommended that you use the MoS2 based on cost.
Chemical synthesis
Synthetic method is able to prepare sulfides which are high in purity, have less impurities, fine particle size and meet various functional requirements. Synthetic methods have always been used to produce nano sulfides. There are a number of methods to produce nano-MoS2, for example, the thermal decomposition of ammonium, the hydrogen sulfide, or sulfur reduction method, the high-energy milling, the carbon nanotube confinement, hydrothermal method, as well as a combination of high-energy physical and chemical methods.

Molybdenum Diulfide:
It is diamagnetic and can be used to convert semiconductors or photoconductors that have a P-type of N-type conductivity.
Molybdenum isothiocyanate can be synthesized for use as a dehydrogenation catalyst.
Molybdenum diulfide has also been referred to as “the King of Advanced Solid Lubricants”.
Molybdenum diulfide is an inorganic powder that’s made from molybdenum concentrate, which has been chemically purified through a change in the molecular composition.
Molybdenum Disulfide disperses well and is not required to be added. It is added to greases as a colloidal phase and does not replace the original grease.
Molybdenum diulfide also extends the life span of equipment by being suitable for conditions such as high temperatures, pressure, viscosity or high loads.
Molybdenum Disulfide is a good friction material because it reduces friction at low temperatures and increases friction at higher temperatures. It also reduces combustion losses. The friction material is easily volatilized.
Anti-friction: Because the size of the disulfide particle formed by supersonic jet milling can reach 325-2500 Mesh, the particle hardness can be up to 1-1.5 and the friction coefficient can be 0.05-0.1 it can also used in friction materials for the anti-friction effects;
Molybdenum dioxide is a non-conductive material. Molybdenum, trisulfide or trioxide, as well as silicon carbide can cause increased friction. When the temperature of a friction material increases sharply because of friction, the molybdenum dioxide particles that are shrinking gradually heat up, and then expand. This increases friction in the axial directions.
Antioxidant : Molybdenum Disulfide, obtained from a comprehensive chemical reaction, has a pH of 7-8 (slightly alkaline). It is a coating that protects other materials from oxidation.

Store Molybdenum Disulfide MoS2 in the following conditions:
Molybdenum Disulfide MoS2 Pulp will be affected by the dampness of the mixture. The powder must be kept in a dry and cool room. Molybdenum Disulfide should not be exposed to stress.

Packing & Shipping Molybdenum Disulfide MoS2:
The packaging depends on the amount of Molybdenum Disulfide MoS2 POWDER.
Molybdenum Disulfide MoS2 Poudre packing: 100g, 500g, 1kg or 25kg/barrel vacuum packaging, or your request.
Molybdenum Disulfide MoS2 Pulfide shipping: Could be shipped by air, sea or express as soon after payment receipt.



Technology Co. Ltd., () is an established global chemical material manufacturer and supplier with over 12 years’ experience in the production of high-quality nanomaterials. These include boride powders, nitride particles, graphite particles, sulfide particles, 3D-printing powders, etc.
Contact us by sending an email if you need high-quality chemical products. (brad@ihpa.net)