Nickel Titanium Alloy Pulverized
A binary alloy made up of nickel and titan, it is also known as the shape-memory alloy. Shape memory alloys are special alloys that automatically recover their plastic deformation and return them to their original shapes at specific temperatures. It has a higher expansion rate than 20%. The fatigue life of the spring is approximately 1*107. It has a damping property 10 times greater than an ordinary spring. Its ability to resist corrosion is greater than that of the most medical-grade stainless steel. This makes it a versatile material.
The memory alloy’s unique shape memory function is not the only thing that makes it special. Other than its wear resistance, corrosion resistance and high damping, other outstanding characteristics include superelasticity, high damping and high resistance to corrosion.
There are two phases of the crystal structure that can be formed by temperature or mechanical pressure changes, the austenite and martensite phases. In cooling, Nitinol’s phase transition sequence is austenite (parent phase), rhomboid (R phase) and martensite phases. If the R phase is rhomboid then the austenite at higher temperatures (greater than the equal: temperature austenite started at), or after the load has been removed is cube. This shape is very stable. Martensite phases are relatively low in temperature (less that Mf, the end martensite temperature), and can be loaded (by external activation), hexagonal, ductile.
Physical Properties of Nickel Titanium Alloy Powder
The shape memory
. Shape memory means that the parent phase of a specific shape can be cooled below Af temperature to create martensite. The martensite will then deform at below Mf temperature before being heated below Af. Reverse phase transformation allows the material to automatically restore its original shape. Actually, shape memory is an inductive phase transition in Nitinol.
A specimen with a superelasticity phenomenon is one that has a strain greater than the elastic limit. The strain can be easily recovered by unloading. The stress-induced martensitic transform occurs in the parent material and causes a change in mechanical behavior. Hooke’s law does not apply to this alloy, as its elastic limit is much higher than for ordinary materials. Superelasticity is not affected by thermal energy, unlike shape memory properties. Hyperelasticity, in other words, means the stress is not increased with an increase in strain over a range of deformations. You can divide hyperelasticity into nonlinear and linear hyperelasticity. Nearly linear relationship exists between stress and strain in the old stress-strain graph. Nonlinear Hyperelasticity refers only to stress-induced martensitic and its inverse transformations occurring during loading/unloading processes. It is also known as pseudo-elasticity phase transformation. Nitinol alloy has a pseudo-elasticity around 8%. You can change the heat treatment conditions to alter Nitinol’s superelasticity. If the heat treatment conditions are changed to 400C, then the superelasticity will decrease.
Sensory to temperature
. The oral temperature does not affect the stainless steel wire or CoCr alloy tooth orthoticwire orthotic force. Variation in temperature affects the orthodontic strength of superelastic Nitinol orthodonticwire. If the deformation rate is constant, it will be less. When the temperature is rising, the orthodontic force grows. The appliance can stimulate blood circulation in areas where there is blood stagnation. It will accelerate tooth movement. The Orthodontists can’t measure and control corrective forces in an oral environment.
. Research has shown that the nickel-titanium steel wire’s corrosion resistance is comparable to that of stainlesssteel wire.
Nickel-titanium form memory alloy (about 50% nickel) is well-known for its carcinogenic effects and cancer-promoting properties. The Ni-Ti alloy has good biocompatibility because the layer of titanium oxidation on its surface acts as a barrier. Ni may be blocked by TiXOy/TixNiOy in the surface layer.
Wet orthodontic force
. Dental orthodontic wires that are commercially used include austenitic, stainless steel wire, cobalt–chrome–nickel alloywire, nickel–chromium alloy wires, Australian alloywire, gold alloywire, and ss tungsten alloy wire. The load-displacement curves for these wires were tested under the tensile and three-point bent conditions. Nitinol’s unloading curve platform is both the lowest- and most flattest. It indicates that Nitinol provides the best and most gentle correction force.
Great shock absorption
. The more vibrations caused by night molars chewing or other actions on the archwire, both the root and the periodontal tissue are subject to greater damage. Study results showed that archwire stainless wire wire vibrations are greater than those of hyperelastic ni-titanium silk and super-elastic ni-titanium arwire. The initial vibration amplitude for archwire steel wire was only half the size of that of stainless wire wire. Good vibration and shock absorption properties of archwires is essential to the health and well-being of teeth. Traditional archwires, such as the stainless steel, can increase root absorption.
|Nickel Titanium Alloy Powder Properties|
|Additional Names||nickel-titanium, shape-memory nitinol, NiTi, Ni-Ti|
|Get the exact Mass||N/A|
Nickel-Titanium Alloy Pulver Applications
Ni-Ti is a widely used alloy in biomedicine, aerospace, defense and military industries.
Major Supplier of Nickel Titanium Alloy Powder
Buffalotours Nano Technology Co. Ltd. (Buffalotours), is a global trusted supplier and manufacturer for advanced chemical material. It has over 12-years of experience in producing super-high-quality chemicals.
High-quality products are what you want
Nickel Titanium Alloys Powder
Please feel free and contact us to send an enquiry. (firstname.lastname@example.org)