High Purity Molybdenum Silicide MoSi2 Powder CAS 12136-78-6, 99.5% |

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Molybdenum Silicide, also called molybdenum diilicide and having the chemical formula MoSi2, is a high-temperature materials with excellent performance. Purity: 99%
Particle Size: 5- 10um
Molybdenum silicate MoSi2 Powder
MoSi2 This is a compound that contains intermetallic elements. The molybdenum sulide This refractory material is mostly used in heating elements. It has a medium density, with a melt point of 30 degrees C. At high temperatures it forms a silica passivation to protect the material from further oxidation. The thermal stabilities of MoSi2 These materials, which are high-radiation coatings used on thermal shields to protect from the atmosphere and use them next to WSI2, have a thermal stability that makes it ideal for thermal shields. MoSi2 powder The material has a four-square crystalline structure (a-modified). Its b modification is hexagonal, and it is unstable. It is insoluble with most acids. However, it dissolves in nitric or hydrofluoric.

The following is a list of the most popular ways to contact us Disilicide of molybdenum MoSi2 At temperatures below 1000 deg C it becomes brittle. It will also lose creep resistance at temperatures of 1200 deg C and above. These properties are restricted to the structural materials of their material but can be altered by using a composite.

Molybdenum Disilicide (MoSi2) This material is promising for high-temperature structural uses. It has a melting point of 2030 C, excellent oxidation resistant and a density of 6.24 g/cm3. The material’s low toughness in low temperatures, and its high creep rates when heated to higher temperatures, have prevented it from being used for structural applications. The development of a new material has taken a lot of effort. MoSi2 Composites Alternatives to pure The molybdenum diilicide Use in aggressive and oxidizing environments. Molybdenum Disilicide Based Heating Elements High-temperature furnaces are widely used to manufacture these materials. For microelectronics, the combination of low electrical resistance and high thermal stability with electron migration resistance, excellent diffusion barrier characteristics, and high thermal stabilities is essential. Please send us a message to receive the latest. Molybdenum Silicide Price You can buy if you want to Molybdenum Silicide MoSi2 Powder Bulk discounts are available.

Characteristics and Applications of Molybdenum Silicide MoSi2:
Molybdenum Silicide MoSi2 (CAS 12136-77-8) powder has high melting temperature, high corrosion resistance and high oxidation resistant, good electrical conductivity.

Technical Parameters of Molybdenum Silicide MoSi2:
Product Name MF Purity Particle Size Melting Point Density Color
The molybdenum sulide MoSi2 99% 5-10um 2030 6.24g/cm3 dark gray

Chemical Composition of Molybdenum silicate MoSi2 Powder
MoSi2 Mo Si C S Fe S You can also find us on Twitter @Ni
>99% >60% Balance 0.2% 0.02% 0.19% 0.015% 0.05%

What is Molybdenum Silicate? MoSi2 Powder made?
Molybdenum-based materials such as MoSi2 and disilicide are typically made through sintering. Plasma spraying allows for dense monoliths as well as composites to be produced. This method produces a material that may contain b-MoSi2 in varying proportions due to its rapid cooling.

Applications Molybdenum Silicide MoSi2 Powder:
Heating elements made of molybdenum diilicide can be used at temperatures of up to 1800°C in electric furnaces in laboratories and production environments for glass, steel production, ceramics and electronics. They can also be used in heat treating materials. Molybdenum Disilicide can be used as A Contact Materials in microelectronics.
Heating element
MoSi2 (MoSi2 for short) is a conductive silicon dioxide that exhibits an oxidation reaction due to the presence of a stable layer of silica on its surface.
While the MoSi2 top element can operate up to temperatures of 1800 deg C (or a maximum of 2200 deg C), the material is extremely brittle. It may experience serious creep when in use. They are still useful for process, as they can work with high electrical load without aging and will not increase resistance during use. They are antioxidants in oxygen, air and oxygen-rich environment.
The operating temperature can be reduced due to the failure or the protective layer.
MoSi2 components are available in straight or bent forms of various sizes. These elements are mostly used in production and laboratory furnaces for ceramics. glass, steel and other industries.
High-temperature structure
MoSi2’s amazing properties and high temperature elasticity make it a promising material for high-temperature uses such as gas turbine engines. Many researchers are trying to improve the high temperature creep resistance as well as low temperature ductility. There are no commercial composites that offer all the desired features.

SEM image of molybdenum silicide MoSi2 powder

Molybdenum Silicate Powder XRD:

Packing & Shipping Molybdenum Silicide MoSi2 :
The packing depends on the amount of molybdenum Si2 powder.
Packing of Molybdenum Silicide MoSi2 Powder Vacuum packaging 100g,500g or 1kg/bag. 25kg/barrel.
Shipment of molybdenum silicide (MoSi2) powder Once payment has been received, goods can be sent by air or sea as soon as possible.

Technology Co. Ltd., () is an established global chemical material manufacturer and supplier with over 12 years’ experience in the production of high-quality nanomaterials. These include boride powders, graphite particles, sulfide particles, 3D-printing powders, etc.
Looking for high quality MoSi2 powder Contact us by sending an email. (brad@ihpa.net)

Molybdenum Silicide Properties

Alternative Names Powdered molybdenum silicate, or MoSi2, disilicide
CAS Number 12136-78-6
Compound Formula MoSi2
Molecular Mass 152.11
Appearance Gray to Black Powder
Melting Point 1900-2050 degC
Boiling Point N/A
Density 6.23-6.31 g/cm3
Solubility In H2O N/A
Electrical Resistivity 0.0000270 – 0.0000370 ohm-cm
Specific Heating 0.437 J/g-degC (23 degC)
Tensile Strength 185 MPa Maximum (Ultimate).
Thermal Conduction 66.2 W/m-K (23 degC)
Thermal Expander N/A
Vickers Hardness 900-1200
Youngs Modulus N/A
Exact Mass 153.859261

Molybdenum Silicide Health & safety Information

Sign Word Warning
Hazard Statements H302-H312-H332
Hazard Codes Xn
Risk Codes 20/21/22
Safety Declarations 36
RTECS Number N/A
Transport Information N/A
WGK Germany 3
Tagged . Bookmark the permalink.

Comments are closed.