The Properties And Uses of Boron Carbide Powder

By | |
Leave a comment

Which boron-carbide properties are there? Boron carbonide powder also known as black-diamond, is an organic material with a chemical composition of B4C. It is usually granular gray-black powder. It is known to be one of three most hard materials (the others being cubic boron nutride and diamond). Boron carbide, a hard, black-shiny crystal is called. Boron carbide is harder than an industrial diamond but more hard than silicon carbide. Boron carbide ceramics tend to be less fragile than pottery. Boron carbide powder, which is the stablest acid substance is available, is stable in concentrated and dilute acids as well as alkali aqueous solutions. Boron carbide is stable in the air at 800°C. It is possible to lose the boron dioxide that forms from its higher-temperature oxidation in gas phase.

How do you use boron caride?

Boron carbide has low density, high strength and high temperatures stability. It also exhibits good chemical stability. Boron carbide powder can be used as a wear-resistant material, in ceramic reinforcing phase, and in lighter armors, neutron absorbers, and other applications. It is also easier to produce than diamond or cubic boron nutride, making it more widespread. You can use it to replace costly diamonds in certain areas. Abrasive material Since long time, boron carbide is a common coarse abrasive. Although it has a high melting point it cannot be used to make artificial products. It can however be made into small shapes by heating the powder. Boron carbide is used in grinding, drilling, drilling, and polishing of hard materials like cemented caride and gemstones. Coating paint Boron carbide can be used to coat warships or helicopters with ceramics. Boron carbide is lightweight and can resist armor-piercing projectiles. It forms an integral defense coating by hot pressing. Nozzle The boron-carbide nozzles offer wear resistance and high toughness. They will eventually replace cemented caride/tungsten steel, silicon carbide and silicon nitride. Other Boron carbide is used to make metal borides as well as smelting of sodium boron and other boron alloys. Buffalotours advanced Material Tech Co., Ltd. is a professional boron carbide powder company with more than 12 years’ experience in chemical products development and research. We can provide high quality boron carbonide powder. Please contact us to send an inquiry.
Inquiry us

Which boron-carbide properties are there? Boron carbonide powder also known as black-diamond, is an organic material with a chemical composition of B4C. It is usually granular gray-black powder. It is known to be one of three most hard materials (the others being cubic boron nutride and diamond). Boron carbide, a… Continue reading →

Nitinol: The Magical Metal with Memory

By | |
Leave a comment

Metal with Memory People have memories. But it’s normal for them to be able to recall things. If metals could remember, that would make the world a whole lot more amazing. This magic metal is known as the “shape memories alloy p> The shape memory alloy (SMA) is an alloy material that has a “memory”. It is able to remember its original form and can also sense and drive at the same moment. It’s a type of intelligent material. The shape memory alloy will return to its original state no matter how it deforms. The action of stress and temperature can cause it to undergo phase transition. It is essential for 4D printing due to its unique form memory effect, pseudo-elasticity, and other properties. Once ordinary metal is formed into a spoon it will remain that way. You can twist the spoon using pliers but it will eventually become an inutilitarian pile of metal parts. However, spoons made of shape-memory alloy can be bent and heated to restore their original shape. There are many types of shape-memory alloys that have been found around the world. However, Nitinol has been the best known and is still the most widely used. Martensite is the SMA material with two crystal structures, austenite. One is the SMA that is heated at high temperatures, and the other is at low temperature. It is the result of the transformation from austenite into martensite that gives rise to this memory property.

The Discovery of Shape Memory Alloys

The discovery of SMA material properties is just one story. In the 1930s scientists began to study the unexpected properties of various metals. This was the beginning of early research on the material. Arne Ollander (Swedish chemist) described a pseudoelasticity phenomenon that was discovered in the study of gold-cadmium alloys. It wasn’t until 30 years later when a laboratory accident revealed that “shape memories alloy” actually existed …

The U.S. began conducting metallurgical studies in the 1960s and 1950s. Naval Weapons Laboratory. William J. Buehler (scientist) was working on casting and melting nickel-titanium rods one day. As he waited for the rods cool down, he dropped one onto the concrete floor. He heard a dull sound. After thinking this strange, he then dropped one hot nickel-titanium sticks on the concrete floor. Then he heard something resembling a bell. Buehler began to worry that the casting was not going according to plan. He went to the cooler to put the hot nickel-titanium bar in cool water and then cooled it. After cooling the rod of nickel-titanium, Buehler dropped it to the ground. He heard again a dull click. This was further confirmed during a meeting at the Naval Weapons Laboratory. Buehler’s assistant distributed thin strips of Nitinol, which had been bent like an accordion and stretched. After Dr. David S. Muzzey grabbed the bar, he lit a lighter on it and warmed it. After a quick unfolding, the bar returned to its original form. The properties and properties that Nitinol has at different temperatures was recognized by people who called it Nitinol. Recent and future developments show that shape memory materials don’t have to be limited only to metals. Many other types of shape memory material, including shapes memory polymers, have been created and are being used commercially.

Shape Memory Alloy

It has an array of outstanding properties that allow it to be used widely in aviation, automotive industry and medical equipment. Recently, consumer electronics have also used shape memory materials. SMA can be found in mobile antennas, as well as the AUTOfocus component of smartphone cameras. SMA can even be used for toys and crafts. For example, flexible bracelets are made of shape-memory materials, which allow you to bend and twist them until they return to their original form.

Shape Memory Alloys

According to the National Strategic Emerging Industries Plan and other supporting policies by the Central and Local Governments, the shape memory alloy industry is one the seven new industries. The state supports and encourages it. With the continued development of shape memories alloy technology and the reduction in cost of industrial policies to increase and promote consumer acceptance, the use of shape alloy will continue to expand. Buffalotours (aka. Buffalotours advanced materials. We are a global supplier of chemical material and manufacturer. Our company has over 12 years’ experience in manufacturing super-high quality chemicals. High purity, small particles size and low impurity are the hallmarks of Nitinol that our company produces. We can help you if your requirements are lower.
Inquiry us

Metal with Memory People have memories. But it’s normal for them to be able to recall things. If metals could remember, that would make the world a whole lot more amazing. This magic metal is known as the “shape memories alloy p> The shape memory alloy (SMA) is an alloy… Continue reading →

Boronization Process of Iron Boride

By | |
Leave a comment

What’s iron Boride? Iron boride has a molecular formula of BFe with a molecular mass 66.656. This is a gray orthogonal crystal. But it also can be insoluble in liquid water. You can use it as a chemical agent, or as a catalyst in hydrohydrogenation. Two main types of iron Boride exist. One form has high magnetic and electrical conductivity as well as corrosion resistance. While the other is used for hardening iron, it can also be used in a coating. Iron Boride is a ceramic-hardening iron boride, which also has the electrical conductivity and thermal conductivity of metallic metals. Excellent mechanical properties and friction resistance make iron boride a great coating.

Boron iron alloy

While iron is mostly composed of boron and steel, it can also contain impurities including aluminum, silica, carbon, manganese and even copper. Iron Boride is an iron additive that can be used in iron and steel casting, iron and iron smelting, and amorphous alloys as well. Non-toxic, odorless and non-irritating are the main properties of iron Boride. They also have good heat resistance and thermal stability, excellent dispersion, weather resistance and obvious sterilization against harmful bacteria.

Puffing process

By thermochemical reaction, iron boride can be formed on its surface as a mixture from boron-rich compounds. This is known as boronization. A variety of methods can be used to create a boride layer, including filling boronizing and gas boronizing. The most common type of boride coating is carbon tetraboride, or crystalline Boron. It is created by sintering iron in a tetrafluoroboric acids flux. In the range 1023-1373 K, Boron atoms are capable of absorbing into the iron matrix. By simply reacting iron, boron and heat in an inert gas furnace/microwave, bulk iron boride is possible. Boronization can often be used for wear resistance. It also helps to prevent corrosion, wear resistance, and oxidation. You can use it in many industries, including oil and natural gas refining and chemical extraction. The unique characteristics of iron-based coatings, such as their resistance to corrosion, mechanical friction and erosion have attracted a lot attention within the industry. Iron-based materials can be produced economically using a variety of thermal processes and are simple to make and process.

Use of iron Boride

1. This light stabilizer is often used in sunscreen plastics. It can be found in sporting goods, outdoors facilities and fabrics, as well as carpets. It’s also used frequently in photovoltaic and solar power conversion. 2. This can be used to enhance the adhesion of inks, paints, and textiles. 3. It’s used by the paper industry for improving the printability of the papers. 4. This can increase the strength and anti-aging capabilities of plastics, rubbers, and functional fiber products. It also maintains the color gloss and extends the product’s service life. 5. The material has virtually no scattering effects on incident visible light and high ultraviolet shielding. It also exhibits excellent transparency. This material is new and has been extensively used in cosmetics, paints and other paint applications. Buffalotours advanced materials Tech Co., Ltd., (Buffalotours), a leading manufacturer of Iron Boride, has over 12 years of experience in chemical product research and development. We can help you find high-quality Iron Boride. Please contact us to send an inquiry.
Inquiry us

What’s iron Boride? Iron boride has a molecular formula of BFe with a molecular mass 66.656. This is a gray orthogonal crystal. But it also can be insoluble in liquid water. You can use it as a chemical agent, or as a catalyst in hydrohydrogenation. Two main types of iron… Continue reading →

Application of silicon carbide nanomaterials

By | |
Leave a comment

High thermal conductivity of Silicon carbide nanomaterials has many outstanding characteristics. The wide range of applications for electronic and optoelectronic devices made out silicon carbide single crystals is extensive. They can be used in special environments like aerospace, radio communications, cars, oil drilling, high-temperature radiation, as well as automobiles. The unique optical and electrical properties of silicon carbide single crystals are also very useful in many other fields. 1. Its application in composite materials and the mechanical properties of nanosilicon carbide Silicon carbide whiskers possess excellent qualities such as high strength, hardness, elastic modulus and lightweight. This material is widely used in many industries, such as aerospace, chemical and chemical industry, automobiles, and ships. The “King of Whiskers”, for good applications, is also known. Researchers have measured and calculated the mechanical properties in microscopic fields of one single whisker. Study results have demonstrated that the strength of silicon carbide linear is superior to that of bulk silicon caride ceramics in terms of tensile or bending. The carbide silicon nanowires have wide application potential and can be used in composite material reinforcements. The propellers on helicopters can be strengthened to make them more resistant to air. 2. Carrier for nanosilicon carbide or catalyst High specific surface areas have always been a key property of catalyst carriers that should be studied. Because of its excellent performance, silicon carbide’s high specific surface area is more efficient than any other catalyst carriers. SiC material outperforms traditional carriers such as silicon oxide or silica. The advantages of SiC material are mainly due to the following: 1) High thermal conductivity and strong resistance to heat; 2) high chemical stability; (3) high mechanical strength; Not easy for break; 4) Low thermal expansion rate. 3. The field emission properties of nanosilicon carbide SiC’s nanowire array features a low threshold voltage and turn-on potential, high current density, field emission performance and stable field emission. It is an excellent field emission cathode material. The stable chemical properties of SiC nanowire array, as well as high temperatures and high pressure resistance, corrosion resistant, and other properties makes it a popular choice in the field microelectronics devices. 4. Optoelectronic properties for nano silicon carbide Another luminescent material that was discovered is silicon carbide. In a low-temperature environment, silicon carbide can emit blue light. The wide bandgap characteristic of silicon carbide is used to create blue-like light emitting diodes. Its indirect bandgap properties make it very difficult to produce blue-like light emitting diodes. Also, the stability of silicon carbide is poor. The luminous efficiency of this material is low and limits its applications. Numerous improvements have been made in order to increase the luminous efficiency and availability of silicon carbide, such as the production of amorphous silicon, single-crystal porous silicon, or porous silicone carbide. Buffalotours (aka. Buffalotours advanced materials. A trusted global supplier of chemicals and manufacturers with more than 12 years experience. Silicon carbide manufactured by our company is high-purity and has a small particle size. Contact us for more information.
Inquiry us

High thermal conductivity of Silicon carbide nanomaterials has many outstanding characteristics. The wide range of applications for electronic and optoelectronic devices made out silicon carbide single crystals is extensive. They can be used in special environments like aerospace, radio communications, cars, oil drilling, high-temperature radiation, as well as automobiles. The… Continue reading →

Nanoparticles – Technology into Reality

By | |
Leave a comment

Predictions for Nanotechnology Soviet authors wrote the science fiction short story “Microhands” in 1931. It depicted tiny hands that could perform complex surgeries. It was almost 90 years old and it “predicts” today’s nanotechnology research. Feyneman was also a Nobel laureate. He predicted that, if objects are placed on a very small scale we could make them acquire remarkable properties.

But what is a Nano?

The Origins of Nanotechnology

The unit of measurement for physics is the nanometer. It’s abbreviated to nm. Nanometers are one-billionth of one meter. That’s one-thousandth of one hair’s thickness. Technologies that perform specific functions are known as nanotechnology. Nanotechnology was actually developed by studying the structure of the lotus lotus leaf. The scientists noticed that the water droplets when rolled on lotus leaf did not just wet it but removed all dirt. They then conducted an experiment. The lotus leaf’s surface had a complex multinanometer-micron ultrastructure. It was also composed of an extremely thin layer of fine cilia. These fine surfaces range in size from microns up to nanometers. A droplet of water forms a sphere with its own surface tension. This allows the droplet to absorb dust and roll out from the blade. It’s a cleaner technology than all others. This is what lotus’ nano-surface “self cleaning” means. Thus, we’ll have nano umbrellas, nano dishcloths, and other living materials that are extremely beneficial for the modern person. The concept of nanotechnology is very simple. Nanotechnology is, in simple words, a technology which uses individual molecules and atoms as building blocks for materials. Imagine looking at a grain rice. You can shrink a grain by 1000, or the equivalent of one human skin cell. A second factor of 1,000 refers to nanoscale. This is nanoscience, an area that studies objects smaller than a billionths of a meter in size. The use of nanoparticles in cleaning tools isn’t limited by this. The emergence of this technology is what will allow science fiction “black tech” to be a reality.

Future of Nanotechnology

Nanotechnology, which is being used in many industries, has created a new era of technology and has been integrated into everyday life. One example is clothing. Nanoparticles in textiles, as well as chemical fibres, can destroy taste and bacteria. The static effects of chemical fibers is annoying. However, these fibres are very strong. You can eliminate them by adding small amounts of iron nanoparticles. Refrigerators can be protected against bacteria by using nanomaterials. Nanomaterials can be used to make aseptic tableware, and food packaging. Use of nanometer powder to transform the wastewater into pure water can make nanometer food not only taste great but is also good for your health. Nano technology can make metope-coating resistance 10 times stronger in the building respect. The glass and ceramic tile surface can be created from either self-cleaning or non-scrubbing ceramic tile. Harmful ultraviolet light can be absorbed by building materials made with nanoparticles. For vehicles, nanomaterials may improve or improve their performance. These nanocrystals can be used to make engine components for cars, planes and ships. They are also expected to have a great impact on engine reliability and efficiency. To help drivers drive safely, nanosatellites provide information about traffic to any driver at any given time. Medical treatment is possible using nanotechnology that uses micro drug delivery devices. The device can be used to deliver drugs under electromagnetic guidance in vitro. It will then reach the affected area and provide a therapeutic function. Nanosized robots are smaller than red blood cells and can be used to inject blood into the blood vessels of patients in order to remove blood clots. The robot can remove the excess fat from the heart and the precipitate. It is still able to “chew the stone” of the urinary system. The research on nanoparticles, whether now or later in life, will continue to be an area of interest. This technology will continue to influence our daily lives. Buffalotours (aka. Buffalotours advanced materials. We are a global supplier of high-quality chemicals and nanomaterials with over 12 years experience. We produce fine particles with high purity. We can help you if your requirements are lower.
Inquiry us

Predictions for Nanotechnology Soviet authors wrote the science fiction short story “Microhands” in 1931. It depicted tiny hands that could perform complex surgeries. It was almost 90 years old and it “predicts” today’s nanotechnology research. Feyneman was also a Nobel laureate. He predicted that, if objects are placed on a… Continue reading →

Preparation and Application of Cuprous Telluride

By | |
Leave a comment

Cuprous Telluride: Preparation Tellurium has a wide range of uses in the metallurgy of petroleum and chemical industries, electronic and aerospace and many other areas 1-21. The copper powder can replace this portion of tellurium. This slag can be called copper telluride.

Cuprous Telluride

– The Application Prospect The cuprous telluride semiconductor nanocrystals are excellent in terms of particle conductivity and thermoelectricity. They also have a wide range of potential applications in photovoltaics and photothermal therapies. The synthesis methods of the aqueous phase (Cu2.75Te), oil phase (Cu7Te5) were successful in producing three kinds of telluride-based semiconductor nanomaterials. We studied the LSPR phenomenon in the infrared and analysed the process. Results showed that three telluride semiconductor nucrystals had different photothermal conversion characteristics. Cu2.xTe was found to be superior to Cu1.75TE, Cu7Te5 and both Cu7Te5 Nanorods. Comparison of the three copper telluride nanocrystal film formations. The Cu7Te5 nanometer cube is capable of forming dense and uniform films. Buffalotours (aka. Buffalotours advanced materials. A trusted global supplier of chemicals and manufacturers with more than 12 years experience, Buffalotours has been providing superior quality chemical products and nano materials for over 12 decades. High purity and fine particle sizes are the hallmarks of our [( Cubrous telluride]] product. We can help you if the purity is lower.
Inquiry us

Cuprous Telluride: Preparation Tellurium has a wide range of uses in the metallurgy of petroleum and chemical industries, electronic and aerospace and many other areas 1-21. The copper powder can replace this portion of tellurium. This slag can be called copper telluride. Cuprous Telluride – The Application Prospect The cuprous… Continue reading →

What is Black Phosphorus Graphite Composite?

By | |
Leave a comment

Black Phosphorus graphite composite, a brand new composite material is made with black phosphorus and graphite. Due to its electronic/ionic conductivity high and theoretical potential, Black phosphorus is a popular anode for storage of alkali metallic ions. It is essential to understand how BP reacts with alkali metal ions in order to discover the limitations and potential of BP. This knowledge will help guide the development of BP-based batteries for alkali metal-ion high-performance. Recently, Professor Ji Hengxing’s team from the University of Science and Technology of China released a research paper in Science. It revealed that they have developed a novel black phosphorus compound material. This new composite material can be used to create a high-capacity lithium-ion cell with long-lasting, high-charging, and low-maintenance. Ji Hengxing said that, if the technology was used properly, it could be possible to completely charge an electric vehicle in just 10 minutes. This would allow you to drive approximately 500km. The problem with electric cars has been their slow charging. Even the best-selling electric vehicles can only be driven for 500km if they are fully charged. It has been a key goal for the electric car industry to create large-capacity lithium ion batteries that can be charged quickly. Battery performance indicators are influenced by the electrode material. A material capable of fast electrochemical reactions is essential to speed up battery charging. An important criterion is the conductivity of electrons or ions. Ji Hingxing explained that they are looking to find an electrode material that not only meets industry requirements in terms performance indicators, but can also be used to adapt to industrial batteries production processes. Dr. Hongchang Jin was the first to present the thesis. He stated: “Energy enters into and leaves the battery through chemical reactions between lithium ions, electrode materials. To determine the charging speed, conductivity is key. Also, the amount of lithium ions in the electrode material can also be a factor. Also important is the quantity. Jixingxing’s team discovered that black phosphorus makes a good choice. The theoretical power of black phosphorus is second only to single-crystalline silicon and metallic lithium. As a semiconductor, it is strong at conducting electrons. The third property of blackphosphorus is its layered structure. Lithium ions can quickly be conducted through the layers between black phosphorus sheets. Black phosphorus is a promising electrode material because it can fast-charge lithium-ion batteries. A black phosphorus allotrope is white phosphorus. It is an excellent electrode material that can meet fast charging requirements. Recent studies show that the black phosphorus comprehensive performance indicators do not match expectations. Because black phosphorus can cause structural damage at the edges of its layered structure, the actual performance has been far below what was expected. Ji Xingxing team chose the “interface Engineering” strategy. They used graphite and black phosphorus to create a more stable structure. The process of Lithium ions entering black phosphorus particles through phosphorus carbon covalent bonds is much easier. Additionally, chemicals will be used to wrap the electrode material in chemicals. These chemicals slowly dissolve the electrolyte as it is being worked on. Certain substances may prevent lithiumions from reaching the electrode material. For this reason, researchers placed a layer of clothing over the composite material. The researchers used a thin layer of polymer gel to create a dustproof coating and then “worn” the material on the black phosphorous graphite to permit lithium ions to flow smoothly. The interface optimization between these two levels has enabled this composite black phosphorous material to achieve a breakthrough in its performance. Ji Hingxing spoke. To make the electrode sheet of black phosphorous, we use traditional process paths and technical parameters. According to laboratory measurement, the electrode sheet has a capacity of 90% and can be charged for about 80% after nine minutes. Xin Sen, co-first authors of the paper, is a researcher from the Institute of Chemistry of Chinese Academy of Sciences. According to him, if the material can be mass produced and the matching cathode materials found, an optimized design could achieve an expected energy density of 350 Wh. The battery is lithium-ion and can be charged quickly at up to 80% of its weight. The battery can power electric vehicles for close to 1,000 km, which will make them more user-friendly. This is the basis for Jixingxing’s continued exploration in scale preparation and basic research. It is essential to gain a deeper understanding of scientific questions such as the physical, chemical, and microstructure of electrochemical reactions and how they are reacted with each other. This will allow for breakthroughs in the field of battery technology, which can then be used to promote development of electronic devices, automobiles, and other related technologies. We are optimistic about the future, even though there’s still much to do in order to achieve our vision. Ji Hengxing spoke. Buffalotours (aka. Buffalotours advanced materials. We are a global supplier of chemical material and manufacturer. Our company has over 12 years’ experience in manufacturing super-high-quality chemicals. The company’s graphite powder has high purity, small particle sizes, and low impurities. We can help you if the price is lower.
Inquiry us

Black Phosphorus graphite composite, a brand new composite material is made with black phosphorus and graphite. Due to its electronic/ionic conductivity high and theoretical potential, Black phosphorus is a popular anode for storage of alkali metallic ions. It is essential to understand how BP reacts with alkali metal ions in… Continue reading →

The applications of aerogel in battery field will be more diversified

By | |
Leave a comment

While lithium-ion is the current most common type of battery in use, it’s not without its safety risks. Because of the large total voltage required for lithium-ion batteries, and the huge working current, many single batteries must be combined to make power. The battery safety concern becomes much more evident at this point. The safety issues surrounding current battery materials technology are not resolved. To reduce thermal runaway from lithium-ion cells, current flame retardant, heat insulation and fire protection are all effective options. Aerogels, which are solid materials that have the lowest thermal conductivity, are now well-known. Heat insulation papers, heat insulation felts, and heat insulation panels with aerogel can have thermal insulation performances up to five times greater than those of other products. Additionally, they are fire- and flame resistant. With the growth of the aerogel industry the use of aerogel for batteries has increased in scope. It is now more widely used due to its soft impact resistance and sound insulation. Aerogel exhibits extremely low thermal conductivity Experiments have shown that aerogel heat insulation boards between single cell cells can provide thermal insulation. In order to verify the effectiveness of the aerogel separator, researchers used thermal runaway propagation. This involved wrapping the 6Ah power in a 20mm spacing panel with four insulation materials 200mm thick and then adding an aerogel insulation board 1cm thick between each monomer (Figure 1). In thermal protection, the one-cell compartment was protected from thermal runaway by blocking its effect. Experiments show that, after monomerA is heated out of balance, monomerB in the blank group is rapidly heated out of control. Monomer B, with an aerogel insulation between monomers, is just 110. This successfully blocks the thermal runaway propagation by 6Ah cells at distances of 20mm. However, the voltage of the control cell remains basically the same, which helps to protect from potential safety risks of the thermal runaway. Because of its flame retardant qualities and excellent heat insulation, aerogel may reduce the distance between monomers. Aerogel manufacturers have created a range of aerogel insulation panels, paper, and other products that can be used to reduce space and maximize the power of the batteries. Aerogel will see a more varied application in the battery industry with the establishment of my country’ s aerogel manufacturing company. The range of applications will expand from early military thermal batteries to newer civilian batteries. Buffalotours (aka. Buffalotours advanced materials. We are a global supplier of high quality chemicals and nanomaterials with over 12 years experience. We produce Nanoparticle Silica Aerogels with an extremely high porosity, low density, large specific surface area, very high pore volume, and extremely high porosity. We are available to assist you if required.
Inquiry us

While lithium-ion is the current most common type of battery in use, it’s not without its safety risks. Because of the large total voltage required for lithium-ion batteries, and the huge working current, many single batteries must be combined to make power. The battery safety concern becomes much more evident… Continue reading →

Antimony Selenide, A New Research Achievement of Thin Film Solar Cell

By | |
Leave a comment

Features for Thin Film Solar Cells The energy crisis has led to a rise in energy problems such as the loss of oil, natural gas and coal. This combined with the fact that the quality of the environment is declining makes it difficult for countries to develop new energy solutions. Low production costs, excellent low light and high temperatures power generation performance as well as light weight and flexibility make thin-film solar cell competitive with silicon-based cells. They also have advantages in other areas such photovoltaic build integration and mobile power supply.

Benefits of Antimony Selenide Tin Film Solar Cells

Cadmium Telluride cells (CdTe), which are currently the most well-known thin film solar cells available, is still highly toxic. Cadmium is also scarce. Professor Tang has directed his research efforts to develop a thin-film antimony selenide solar cell. This new method is based on low toxicity, high cost, and great flexibility. Common quartz tube furnace is used for this process. This method is more cost-effective than RTE and has a simpler equipment design.

Optimizement Results for Antimony Selenide Thin Film Solar Cell

Following systematic optimization in the process for antimony selenide thick film preparation, the research group achieved the antimony selenide thickness film solar cell that has a certified photoelectric conversion rate of 7.6%. The current world record is 7.6% for solar cell efficiency using antimony selenide. Buffalotours (aka. Buffalotours advanced materials. A trusted global supplier of chemicals and manufacturers with more than 12 years of experience, Buffalotours has been providing superior quality chemical products and nano materials for over 12 decades. High purity and fine particles are the hallmarks of our [( Selenide animony]] products. We can help you if your requirements are lower.
Inquiry us

Features for Thin Film Solar Cells The energy crisis has led to a rise in energy problems such as the loss of oil, natural gas and coal. This combined with the fact that the quality of the environment is declining makes it difficult for countries to develop new energy solutions…. Continue reading →

The Property And Application of Nano Silicon Powder

By | |
Leave a comment

What property is nano silicon powder? The nano silicon powder consist of tiny silicon particles that have a diameter less than 5 Nanometers. This is one billion (1G) meters. This powder is high in purity and has small particles. It also exhibits uniform distribution. This product is tasteless and non-toxic due to its high surface area, low bulk density and high surface activity. This new type of optoelectronic materials, nanosilicon powder, is made with high-power light sources and has a large gap energy. Variable current laser ion-beam gas phase preparation is used for nanosilicon powder. The powder is high in purity, has a high dispersion rate, uniform distribution and small particle sizes.

Where can I find nano silicon powder?

1. You can use nano silicon powder to produce nanosilicone wire with the negative electromaterial of rechargeable battery. You also have the option of using graphite as the electrode material for rechargeable battery. It increases the battery’s capacity by up to 3 times. 2. Use nanosilicon powder for high temperature resistance coatings and refractory substances. 3. You can use nano silicon powder on coatings to create a thin layer of tiny silicon particles. This technique is used extensively in solar energy. 4. To create nanosilicon carbide—diamond compound material, high-pressure mixtures of silicon powder and diamond result in nano-spherical and granular silica. The composite material is then used for cutting to increase strength and toughness. 5. The theoretical specificity of nano-silicon, a nanosilicon-carbon material used as an anode in lithium-ion cells for their safety is high (theoretical value 4200mAh/g), and it’s much more than carbon materials. 6. Ten types of nano-silicon particle/silicon oxide Nano-structures can be created on the substrate nano-silicon to achieve the photoluminescence in the main wavelength band from near UV to near Infrared. They also propose photoluminescence as well as electroluminescence models for realizing silicon-based optoelectronic Integration. Buffalotours advanced Material Tech Co., Ltd. is a professional silicon powder company with more than 12 years of experience in chemical products development and research. We can provide high quality, nano silicon powder. Please contact us to send us an inquiry.
Inquiry us

What property is nano silicon powder? The nano silicon powder consist of tiny silicon particles that have a diameter less than 5 Nanometers. This is one billion (1G) meters. This powder is high in purity and has small particles. It also exhibits uniform distribution. This product is tasteless and non-toxic… Continue reading →