High Purity 3D Printing Nickel-based Alloy IN738 Powder |

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

In738 is a nickel-based metal powder that’s widely used in the petrochemical, aviation, and nuclear industries.

About 3D Printing Nickel-based Alloy IN738 Powder: Nickel-based Alloy IN738 is oxidation, low expansion, nickel-cobalt-ferrite, aluminum, chromium and niobium addition. It is a material of interest for aircraft gas turbine designers as well as material engineers. The alloy can be used for gap control and accommodating components like rings, housings or shields.

In-738 is a vacuum-smelted, vacuum-casting, precipitated-nickel-based alloy. It has excellent corrosion resistance at high temperatures and higher temperatures, which is better than other low-chromium high-temperature high strength alloys. The design of the alloy provides a gas turbine industry with an alloy that is resistant to corrosion at high temperatures and has good creep resistance up to 1800 * F. It also can withstand prolonged exposure to engine-related environments. Alloy In738 has superior high temperature performance, comparable to alloys 713c. It also offers a significantly better resistance to vulcanization.
IN738 alloys are usually produced using vacuum homogenization, vacuum fuse casting and other high-temperature alloys based on nickel. A typical gtingdom can create metal overheating between 200 and 400 * F, which is above the liquid-phase line temperature of 1500 to 1800. This will depend on the size and shape. If you’re interested in buying 3D Printing Nickel Alloy IN738 powder in bulk, please send us an inquiry for the current price.

Nickel-based Superalloy IN738 Powder for 3D Printing

Composition(percentage by mass)

You can also find us on Twitter @Ni


It is a good idea to use a different language.

















The following are some of the reasons why you should consider hiring someone else









Alloy grades

Alloy number

Nickel-based Superalloy IN738 Powder

Particle size

15-45mm, 15-53mm, 53-120mm, 53-150mm


Spherical or near spherical




Aluminum bag, Vacuum packing


3D printing of metal powder

Other applications

powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.

How do you pronounce 3D Printing Alloy Nickel IN738 Powder produced?
The specific step in the production method for the chromium Nickel-iron alloy is the use of chrome ore and Nickel ore along with a mineral heating furnace melt reducing procedure and a method to smelt a melting.
The temperature of smelting is between 1920 and 1980K. The two ores are melted to high temperatures. To accelerate the reduction speed.
Carbon reduction chromium dioxide generates a start temperature at 1373K.
Iron-element reduction has a known mechanism. The iron oxide reduction reaction starts at a lower temperature than the CR2O3 reaction. Because chromium is in a mug, the reduction is easier. And the chromium found in nickel mines is also reduced into chromium-iron.

Applications of 3D-Printing Nickel Alloy IN738 Powder :
In-738 provides a combination of corrosion resistance and high heat creep that is superior to super gold alloys with lower chromium contents. Inconel-738 is a nickel based alloy that has excellent mechanical properties up to 1800 degrees F (982 degree C) and can be cast in vacuum.
In general, IN-738 alloy has a cutting performance comparable to other high temperature and high strength nickel-based alloys. IN-738 is processed and ground.
The IN-738 alloy was developed to improve the performance of large-sectioned sizes.
In the industrial gas turbine sector, IN-738 is a material that is used for engine components. These components are subjected to high temperatures and thermal stress as well corrosion and sulfuration. The alloy is mostly used in jet engines, gas turbines, and leaves.

Condition of Nickel Alloy Powder IN738:
As the dampness of the room will affect the performance and effects of In738 powder, it is important to store nickel-based alloy IN738 in vacuum packaging and in a cool and dry place. IN738 should also not be exposed to stress.

Packing & Shipping Nickel-based Alloy In738 Powder:
The packing is dependent on the quantity of powder nickel-based alloy IN738.
Niobium-based alloy IN738 Powder Packing: 100g/bag, 500g/bag or 1kg/bag; 25kg/barrel or your request.
Shipping nickel-based alloy powder IN738 can be sent by sea, air or express, as quickly as possible after payment receipt.

In738 Powder Properties

Alternative Names Alloy IN-738 – IN738, IN-738C – 738C – 738CL
CAS Number N/A
Compound Formula Ni Cr Al Fe Mo
Molecular Mass N/A
Appearance Gray to Black Powder
Melting Point 1230-1315
Boiling Point N/A
Density 8.11 g/cm3
Solubility In H2O N/A
Specific Heating 0.10 Btu/lb/deg F (70 deg F)
Poisson’s Ratio N/A
Tensile Strength 159000 psi (70 degF)
Thermal Conduction 82 Btu/ft2/in/hr/degF (400 degF)
Thermal Expander 6.45 x 10. -6 (70-200 degF)
Vickers Hardness N/A
Young’s Module N/A

In738 Health & Safety Information

Sign Word Danger
Hazard Statements H317-H351-H372
Hazard Codes Xn
Risk Codes N/A
Safety Declarations N/A
Transport Information NONH for All Transport Modes
Tagged . Bookmark the permalink.

Comments are closed.